SKU: 97740074432

MapofBeauty 16 Inch/40 cm Short Side Bangs Synthetic Fiber Cosplay Layered Wig (Light Blonde)

Sale price$9.68 Regular price$10.75
Save 10%

Pay in installments of $2.69 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 31 - Aug 5

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

MapofBeauty 16 Inch/40 cm Short Side Bangs Synthetic Fiber Cosplay Layered Wig (Light Blonde)1. Our wig product is made of Kanekalon fiber, which is a thermostable Material, it can be curled or straightened by Electronic Hair stick less than 120 ?. in General, The appropriate temperature is About 70 90 ?, as too High temperatures permanently damage The Hair. 2. Our wig product cannot be dyed. Because there are no Hair cuticle to keep The Color for a Long Time and The Hair cream rinses inside The wig Cap can't be washed. 3. wig Wearing Steps:

1. Our wig product is made of Kanekalon fiber, which is a thermostable Material, it can be curled or straightened by Electronic Hair stick less than 120 ?. in General, The appropriate temperature is About 70-90 ?, as too High temperatures permanently damage The Hair. 2. Our wig product cannot be dyed. Because there are no Hair cuticle to keep The Color for a Long Time and The Hair cream rinses inside The wig Cap can't be washed. 3. wig Wearing Steps: a. comb gently With wide tooth comb; b. Putting on The wig Cap; c. Putting on The wig, adjust inner net Buckle; d. Keeping The wig in place. 4. wig cleaning and care: detangle The Hair using a wide tooth comb; put shampoo in cold or warm Water; soak for 1-3 minutes; rinse With Water; dry With a towel; gently shake The wig to regain its Style, and then dry naturally. 5. Shedding and Tangle Issue: All Wigs will shed and tangle slightly, especially when you wear for The first Time, which is normal. please Use wide tooth comb to comb The Hair Off, comb from end to root, then The wig fiber will not shed and tangle Off anymore. (Tips: Curly wig recommended combing by fingers) 6. Hairstyle and Color Issue: All Wigs are trimmed by Hand, so The Hairstyle may go slightly difference from different batch, you can restyle The wig Base on your need. Colors may vary slightly depending on your personal computer or cell phone monitor settings. We do try our best to accurately represent colors on all our products.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 97740074432

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.1 ★★★★★
Based on 21 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
J
Verified Purchase
Jerry D.
Lexington, US
★★★★★ 5
Direct replacement on my 95 SeaRay 175
Size: PP67-712 V1
My boat started to have issues with not turning over when I used the ignition switch. Replaced the switch and had no effect. Replaced the solenoid and that fixed the problem. Good price, so I replaced all 3 solenoids (Trim/ starter). Solenoids had all needed hardware (nuts/washers)
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 9, 2024
K
Verified Purchase
Kris Nicholas
Lowell, US
★★★★★ 5
They Fixed My Boat
Size: PP67-712 V1
My boat wouldn’t start, and the outdrive wouldn’t go up or down. So I bought three of these solenoids and replaced the starter and both trim motor solenoids/relays. Now it starts right up with no problems and the trim motor is working again also. I have a 2006 Stingray boat.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 7, 2022
J
Verified Purchase
Josh T.
Belleville, US
★★★★★ 1
Poor quality
Size: PP67-712 V1
Poor quality. Replaced a starter solenoid on a mercruser 4.3. Right off install it would click but not make a connection to start motor. Confirmed this was the culprit by jumping the terminals. After testing multiple times found it worked a little less than half the time.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 29, 2026
J
Verified Purchase
Joe Doakes
New York, US
★★★★★ 5
Ya Just Gotta Have One
Size: 7.2 Surround + 3 HDMI
This is a must-have for in-wall wiring of your surround. I chose this one because I installed a 7.2 system with gold-plated jacks and it worked out great. You can get almost any combination of HDMI, subs/surrounds that you need (5.1, 5.2, 7.1, 7.2 etc). Do your planning on location and wire-routing; get good quality speaker wire and HDMI (high-speed with Audio Return Channel); get the remod-style mounting bracket/box then cut your hole at the same height/level as your electrical outlets and preferably between the same studs as your TV's wire-box so your HDMIs just run straight up to the TV (remember to install the bracket BEFORE you run your wires). When connecting the wires to these terminals, it's best to have 10 to 12 inches of wire coming out of the wall because you need space for your hands to manipulate the wires and nuts on the terminals. If you have a basement with access to the floor below the mounting location, it's best to drill 4 half-inch holes straight up through the bottom plate of the wall and feed your wires up those holes. Tip: If your TV and Surround Receiver are fully compatible you really only need 1 HDMI port on the wall plate, because you can plug your devices into the receiver and just sent the A/V/data to the TV while the audio is returned over the same HDMI.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 2, 2016
R
Verified Purchase
Robert E. Hoffman
Louisville, US
★★★★★ 5
Made a wire nest look fairly neat.
Size: 7.1 Surround + HDMI
My only complaint is that it wasn't available in black as it's in a dark walled home theater. However, it's behind the receiver so it's not real visible. It worked as expected and definitely kept the wiring neater and allowed me to run it through the walls.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 1, 2024

recommand products