SKU: 77415934654

High Capacity R180 Rear Diff Cover Kit

$485.97 $539.97
Save 10%
No.2 Bestseller on fiatfullback.su >

Pay in installments of $134.99 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 28 - Aug 2

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

High Capacity R180 Rear Diff Cover KitTested To Perfection The Fuji Racing High Capacity Subaru R180 rear diff cover has been built from a blank sheet with over a year of testing, we have seen whats on the market and stepped it up a notch. manufactured using the latest CNC techniques, each cover is micro polished to give a perfect finish for the fuji racing gold anodising. all leading edges are also bevelled to provide a premium machined finish too. The high capacity cover gains an

Tested To Perfection

The Fuji Racing High Capacity Subaru R180 rear diff cover has been built from a blank sheet with over a year of testing, we have seen whats on the market and stepped it up a notch. manufactured using the latest CNC techniques, each cover is micro-polished to give a perfect finish for the fuji racing gold anodising. all leading edges are also bevelled to provide a premium machined finish too.

The high capacity cover gains an additional 25% more oil, these are a must when you are tracking your Subaru as the standard diffs can overheat very quickly on track when pushing for lap times. This extra 25% higher volume of oil increases the time it takes for the oil to start overheating. Not only does the volume of oil help, but also the additional cooling fins that are machined into the rear of the cover. In addition, we have also added 2 extra ports which allow additional fittings for an external oil cooler as well as 1/8npt port to allow for a stand-alone temp sensor to be fitted.

Each kit comes with 2x stainless M18x1.5 plugs & washers, 2x Magnetic M20x1.5 Plugs & washers & 1x stainless 1/8NPT plug, along with the factory breather cap, OEM subaru gasket, bolts, studs & nuts.

Model Application:

Suitable for the following models:

  • Subaru Impreza WRX RA STi 1996 – 2000
  • Subaru Impreza WRX STi 2000 – 2007
  • Subaru Impreza WRX STi 2007 – 2014
  • Subaru WRX STi 2014 – 2021
  • Subaru Forester STi 2004 – 2007

FITMENT NOTICE
Subaru Impreza & Forester STi 2000 to 2007 will need to fit the 2007 onwards type DCCD diff temp sensor, or you can use your original sensor by removing the sensor from the original subaru bushing adaptor and use a m20x1.5 to m16x1.5 bushing adaptor

What's in the kit:

  • 1 x High Capacity Diff Cover
  • 1 x Diff Cover Breather Cap
  • 1 x OEM Subaru Gasket
  • 2 x OEM Subaru Studs
  • 2 x OEM Subaru Locking Nuts
  • 8 x OEM Subaru Bolts
  • 2 x Stainless Steel M18x1.5 Plugs & washers
  • 2 x Magnetic M20x1.5 Plugs & Washers
  • 1x Stainless 1/8NPT Plug
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 77415934654

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.1 ★★★★★
Based on 10 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
C
Verified Purchase
Crabman
Massapequa, US
★★★★★ 5
Works well on 2003 Corvette.
Color: Carbon Fiber, Size: 2 Pack
I purchased these for usage in my 2003 Corvette convertible. As much as I enjoy the vehicle, they are extremely insufficient for storage. No "usable" built-in cup holder, no pockets and no flat area that can hold a cell phone. The console and glove box are not ideal in this day and age since the phones are used constantly. Enter these excellent little holders. They mount perfectly on the central vent in the dash. If you slide the bases as far as possible to each side and then tighten them down, the base will overlap the non-moving portion of the vent and keep the unit quite stable. I would suspect this is applicable for any vehicle that has the traditional flat vent fins. The holder has a hook that when fished into the vent, clasps over the back of one of the fins. By hooking the fin, once tightened down (careful not to over due this as the vents are just plastic) the installation is as stable as you can ask for vs any of those goofy clamp types that slide off quite easily, especially as they age and sun softens the pads. Benefit from my mistakes on those bad purchases and stay away from clamp mounts. If you have flat fin vents and are looking for a reliable means to mount a phone, this may be just right for you. Best of luck.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 23, 2026
M
Verified Purchase
Michele D.
Houston, US
★★★★★ 4
Good product, but...
Color: Dark Black, Size: 1 Pack
Easy to install. Like the product. The holder does not hold the phone position. It flops down alot.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 10, 2026
M
Verified Purchase
Mary
Bozeman, US
★★★★★ 5
The Perfect Phone Mount.
Color: Dark Black, Size: 1 Pack
It’s the perfect size, easy to install, and works perfectly. I have a 15 pro max iPhone, and it fits perfectly.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 14, 2026
D
Verified Purchase
Darth Fader
Charlottesville, US
★★★★★ 5
Well built and removes cleanly.
Color: Dark Black, Size: 1 Pack
Seems to be very solid and it was a little bit tricky to get it located on the vent blade properly, though that might just be due to the vents shape in my Highlander. I really like that it can be easily moved from one vehicle to another if needed without leaving adhesive residue like my last mount did. The only concern I have is whether the vent blade will support the weight long term. Time will tell I guess. EDIT: This fits all of the vents on my 2011 Highlander great. On my 2022 Highlander it will only attach to the center vents and then just barely hooks on after angling the vent blades enough for the hooks to grab. Even then the mount only makes contact at the very top and bottom of the vent opening. It works, but I wouldn't recommend it as ideal.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 22, 2026
F
Verified Purchase
Fred
Birmingham, US
★★★★★ 5
Works great
Color: Dark Black, Size: 1 Pack
Great product which is easy to use and affordable price.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 17, 2026

recommand products

Rolex Day-Date, Vintage Yellow Gold President Bracelet 36MM Watch 18038
5880.00
Aquolina Pink Sugar For Women 2 Pc Gift Set 34 Oz Eau De Toilette Spray, 845 Oz Creamy Body Lotion, Fresh Scent
30.61
Al Haramain Opulent Saffron Men 3.33 Oz Edp Spray
49.25
Valentino Voce Viva For Women 17 Oz Eau De Parfum Spray
165.81
Rolex Datejust 31, Rose Gold and Steel Slate Grey Roman Dial 31MM Watch 178241(PRE-OWNED)
3920.00