Pacemaker Twin 2.5" Performance Exhaust System with 1-7/8" Headers for HSV VF Gen-F 6.2L LS3 V8 Sedan 2013–2015 - PP5382-05

Pacemaker Full Twin 2.5" Performance Exhaust System with 1 7/8" 4-into-1 Competition Headers & Hi-Flow Cats for HSV VF Gen-F Sedan (6.2L LS3 V8) - PP5382-05

Unleash maximum top-end horsepower, optimize high-RPM cylinder gas velocity, and deliver an aggressive, deep Australian V8 muscle note from your small-block engine with the Pacemaker Sport Systems complete twin 2.5-inch performance exhaust solution featuring 1 7/8" 4-into-1 competition extractors. Specifically engineered to satisfy the high-volume gas clearance demands, intense thermal loads, and extraction thresholds of the high-performance HSV 6.2L LS3 V8 engine configuration, this massive primary setup is optimized for modified, cammed, or high-revving platforms. This premium full system is precision-molded to trace the sedan floor pan lines, clear standard wheelbase chassis channels, and map perfectly around the multi-link independent rear suspension geometry of the VF series HSV architecture. Designed explicitly to interface flawlessly with your vehicle's factory fixed exhaust tips integrated into the rear bumper fascia, this premium kit delivers seamless aesthetic alignment. By upgrading your stock layout to high-flow competition 4-into-1 headers paired with smooth, mandrel-bent twin 2.5" plumbing and 3" high-flow metallic catalytic converters, it maximizes gas velocity tracking to completely eliminate power-robbing backpressure under heavy acceleration. As Australia’s premium exhaust innovator, Pacemaker integrates elite structural engineering with patented V-Tex technology and signature double-skinned mufflers, producing an authoritative performance roar on throttle while actively engineering out harsh interior cabin boom or sedan body resonance to preserve a completely clean, drone-free highway cruising experience.

Note: Fits HSV VF Gen-F Sedan variants built from May 2013 to September 2015 equipped with the 6.2L LS3 V8 engine layout and factory fixed bumper exhaust tips; does not fit Utility (Ute), Sportwagon, or long-wheelbase Grange platforms due to structural floor pan and rear assembly differences.

Features:

Precision-manufactured in Australia to deliver a high-velocity flow upgrade, maximum structural longevity under intense heat, and a refined performance acoustic profile for the iconic VF sedan platform.

• Complete Competition Kit: Comprehensive track-and-street performance solution incorporating high-flow 1 7/8" 4-into-1 headers, 3" metallic high-flow catalytic converters, and a full matching twin 2.5-inch performance intermediate-to-rear exhaust layout.
• 4-into-1 Design Architecture: Race-proven competition extractor layout featuring large-bore 1 7/8" primaries running into a merged collector to optimize top-end gas scavenging and unlock significant high-RPM power gains.
• Factory Fixed Tip Integration: Specific tailpipe outlets engineered explicitly to slide directly into and align perfectly with the standard fixed chrome exhaust tip bezels built into the factory rear HSV bumper bar.
• Premium Materials: Constructed completely from durable, heavy-gauge Exhaust Grade 409 Stainless Steel to ensure superior structural longevity and resistance to thermal fatigue under extreme loads.
• Mandrel Bent Tubing: Rigid twin 2.5" (63.5mm) pipe structure guarantees a smooth, uniform internal diameter through all bends to eliminate gas turbulence and prevent restriction.
• V-Tex Technology: Advanced internal patented anti-drone configuration filters out harsh, low-frequency cabin resonance typical of large-bore V8 layouts without creating any power-robbing flow restrictions.
• Signature Mufflers: Heavy-duty double-skinned 409 Stainless Steel mufflers offer premium outer case reinforcement, preventing case distortion and internal packing blowout under heavy thermal load constraints.
• Direct Bolt-On Layout: Engineered as a comprehensive, vehicle-specific full bolt-up kit that mounts directly onto existing factory rubber hanger positions—no custom fabrication required.

Vehicle Applications:

Important Fitment Notes:

• Specifically engineered to fit HSV VF Gen-F Sedan variants powered by the 6.2L Gen IV LS3 V8 engine layout built from May 2013 to September 2015.
• Bumper Tip Requirement Configuration: This kit is specifically tailored for early VF Gen-F sedan builds that feature factory fixed rear chrome exhaust outlets integrated into the rear bumper fascia. The tailpipes feature an open-ended configuration designed to seat cleanly within those factory bezels without heat mapping issues.
• Sedan Specific Routing Geometry: Due to underbody cavity clearances, standard wheelbase dimensions, and unique factory rubber insulation paths matching the sedan rear subframe assembly, this configuration features chassis-specific intermediate plumbing lengths. It will not adapt correctly to Utility (Ute / Maloo), Sportwagon, or long-wheelbase Grange platforms.
• The large-diameter 1 7/8" 4-into-1 competition header primary pipes are custom-formed for maximum volumetric gas clearance at higher engine revs, making this kit highly ideal for modified, performance-tuned, cammed, or supercharged engine applications.
• Full kit scope: Comprehensive high-efficiency performance solution from engine block to rear exit, including 1 7/8" primary competition headers, premium 3" high-flow metallic catalytic converters, twin 2.5" intermediate plumbing paths, and a signature double-skinned rear sedan muffler assembly.
• Direct bolt-up architecture interfaces seamlessly with original vehicle-specific rubber hanger brackets. No custom modification or cutting layout mapping is required.
• Professional automotive performance technician installation is highly recommended to guarantee ideal ground clearance, check tight steering column tolerances, secure factory bezel placement, and secure gas-tight seals under the floor pan.

Payment & Security:
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.