SKU: 28130515526

Blackmagic Design Spares - ATEM TV Studio Pro 4K - PCB Main

Sale price$19747.28 Regular price$21941.42
Save 10%

Pay in installments of $5485.35 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 27 - Aug 1

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Blackmagic Design Spares - ATEM TV Studio Pro 4K - PCB MainThe Blackmagic Design Spares ATEM Television Studio Pro 4K Main PCB is the primary processing motherboard for the 12G SDI version of the switcher. While it shares a chassis design with the HD model, the internal electronics are significantly more robust to handle the massive data throughput of Ultra HD 2160p60. In the 4K model, the Main PCB acts as the foundational logic board, coordinating with the Mezzanine board (which handles the physical I O) to

The Blackmagic Design Spares - ATEM Television Studio Pro 4K - Main PCB is the primary processing motherboard for the 12G-SDI version of the switcher. While it shares a chassis design with the HD model, the internal electronics are significantly more robust to handle the massive data throughput of Ultra HD 2160p60.

In the 4K model, the Main PCB acts as the foundational logic board, coordinating with the Mezzanine board (which handles the physical I/O) to process high-resolution video with minimal latency.


Core Responsibilities

  • System Logic: Acts as the "General" for the unit, managing communication between the control panel buttons, the network (Ethernet), and the video processing engines.

  • UHD Effects Engine: Processes the 4K DVE, Chroma Keyers, and Media Pool graphics.

  • T-Bar & Control Interface: Interprets the analog signals from the physical T-Bar and translates them into digital transitions on the Program out.

  • Multiview Logic: While the Mezzanine board provides the SDI signal, the Main PCB handles the "windowing" and UI overlay of the Multiview.

  • Power Distribution: Regulates the high-amperage power required by the UHD processing chips, distributing it to the fans and peripheral boards.


When to Replace the Main PCB

  • Total Boot Failure: The unit is plugged into a known working power source, but no lights appear on the buttons and the cooling fans do not spin.

  • Network Loss: The Ethernet port is physically intact, but the switcher refuses to appear on the network or accept a static IP, even after a firmware recovery.

  • Control Panel "Ghosting": The switcher functions fine via the ATEM Software Control, but the physical buttons on the desk are unresponsive or flickering, and the Control Panel PCB has already been ruled out.

  • Memory Corruption: The "Media Pool" consistently fails to hold graphics, or the switcher "forgets" its settings every time it is power-cycled.


Technical Installation Note

Repair Level: 5 (Expert). This is a complete "gutting" of the console.

  1. Dual-Board Separation: In the 4K model, you must first remove the Mezzanine PCB that sits on top of the Main PCB. This requires extreme care to avoid bending the high-density interconnect pins that marry the two boards.

  2. Thermal Management: The 4K Main PCB generates significant heat. You must ensure the main FPGA is clean of old residue and that new thermal pads (not just paste) are used to bridge the gap between the chips and the metal chassis heatsink.

  3. T-Bar Recalibration: After swapping a Main PCB, you may find the physical T-Bar doesn't reach 100% of the transition. You will need to perform a calibration routine (usually found in the ATEM Setup Utility or a specific button-hold sequence) to sync the T-Bar to the new board.

  4. Firmware "Marriage": Once installed, the new board must be updated via USB. The software will detect a hardware mismatch and prompt you to "Update." This process "marries" the new PCB to the existing hardware IDs of the I/O and Control boards.


Diagnostic: Main vs. Mezzanine vs. PSU

Before committing to the expensive Main PCB, use this checklist:

  • No Lights / No Fans: Likely the Internal Power Supply Module.

  • Lights On / Fans On / No SDI Inputs: Likely the Mezzanine PCB.

  • Lights On / No Software Connection / No Multiview UI: This is a Main PCB failure.

Expert Advice: The ATEM TV Studio Pro 4K is notorious for running hot. If you are replacing a Main PCB that "fried," consider upgrading your rack ventilation. Heat is the #1 killer of the FPGAs used on these boards; keeping the internal fan clear of dust is the best way to avoid having to buy this spare again.

Is the console failing to power on entirely, or are you just losing the connection to your computer?

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 28130515526

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.2 ★★★★★
Based on 30 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
L
Verified Purchase
Linda S.
West Palm Beach, US
★★★★★ 1
Pretty blue but stone is too thin.
Gem Type: Created Turquoise, Ring Size: 8
Beautiful blue but too thin and fragile
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 16, 2021
N
Verified Purchase
nihanavan
Lexington, US
★★★★★ 5
Perfect
Gem Type: Created Turquoise, Ring Size: 7
It is exactly what i wanted. Great quality.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 8, 2021
T
Verified Purchase
Tania
Charlottesville, US
★★★★★ 5
I smile when I look at a happy bright colour 😊
Gem Type: Created Turquoise, Ring Size: 7
A very happy ring
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 12, 2021
D
Verified Purchase
Denise
Grantham, US
★★★★★ 3
Nice
Gem Type: Created Turquoise, Ring Size: 10
The ring is nice the band is just a little thinner than what I expected
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 27, 2021
K
Verified Purchase
Kathy F.
West Palm Beach, US
★★★★★ 3
Very pretty ring
Gem Type: Created Turquoise, Ring Size: 8
Very nice ring, but way smaller then the picture. I sent it back.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 23, 2020

recommand products