SKU: 48451248921

Baby-/ Kinderhalskette *Feenzauber*

$53.10 $59.00
Save 10%
No.2 Bestseller on fiatfullback.su >

Pay in installments of $14.75 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 18 - Jul 23

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Baby-/ Kinderhalskette *Feenzauber*Die geknpfte Halskette besteht aus 6mm Mondstein, Karneol, Grne Jade, Andenopal und Bernstein Edelsteinen. Die Kette "Feenzauber" ist ein idealer Begleiter fr dein Kind um seine Herzenswnsche zu erreichen. Die Kette frdert die Unbeschwertheit des Kindes und lsst Sorgen klein werden. Mondstein: Er untersttzt bei ngsten und hilft sie zu bewltigen. Der Mondstein gilt ebenfalls als Schlafstein und trgt dazu bei, das fantastische Trume entstehen und

Die geknüpfte Halskette besteht aus 6mm Mondstein, Karneol, Grüne Jade, Andenopal und Bernstein Edelsteinen. Die Kette "Feenzauber" ist ein idealer Begleiter für dein Kind um seine Herzenswünsche zu erreichen. Die Kette fördert die Unbeschwertheit des Kindes und lässt Sorgen klein werden.

Mondstein: Er unterstützt bei Ängsten und hilft sie zu bewältigen. Der Mondstein gilt ebenfalls als Schlafstein und trägt dazu bei, das fantastische Träume entstehen und Traumerinnerungen bleiben.

Karneol: Der Karneol hilf die eigenen Herzenswünsche deutlich zu machen. Er gilt als Kraftspender für mehr Vitalität und Lebensfreude. Er verleiht mehr Standhaftigkeit und Mut.

Andenopal: Er bietet gute Unterstützung bei kleinere und grössere Sorgen. Er vertreibt Ängste und fördert die Unbeschwertheit im Leben des Kindes. Er Hilft bei Schüchternheit, mehr aus sich herauszukommen.

Bernstein: Bernstein bring eine Leichtigkeit in das Leben des Kindes und lässt Sorgen verschwinden. Ein idealer Begleiter bei Zahnbeschwerden.

Grüne Jade: Dieser Stein stärkt den Mut und die eigene Persönlichkeit und kann sehr gut Ängste und Beklemmungen lösen. Er fördert das innere Gleichgewicht. Wenn sich das Kind unwohl in der Schule fühlt (gemobbt, überrannt) dann ist die Jade ein toller Begleiter.

 

Masse: Babykette (Drehverschluss) ca. 34cm

             Kinderkette (Silber 925 Karabinerverschluss) ca. 39cm

 

Die Silberelemente bestehen aus 925 Silber.

Da es sich um ein Naturprodukt handelt, kann es zu kleinen Farbabweichungen kommen.


Versand

Wir versenden ausschliesslich innerhalb der Schweiz. Die Lieferzeit beträgt 2-4 Werktage.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 48451248921

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.5 ★★★★★
Based on 12 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
J
Jo Bo
Fort Morgan, US
★★★★★ 5
Saves So Much Time, Perfect Fit On Mercruiser Pre-Alpha Outdrive.
This is a very useful kit. Perfect fit to exchange and align the gimbal bearing on a Mercruiser MR/Pre-Alpha Outdrive. The metal rods are strong and well machined to fit the gimbal bearing and the template lines up great with the housing studs. The overall production quality is very good. Great value because the tools are very durable but for me the biggest value is the time saved. I had the bearing out in about 10 minutes. The ability to line up the bearing before attempting to attach the outdrive upper gear unit is very convenient and saves so much time. This are simple tools, very easy to use.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 1, 2026
R
Rick
Grantham, US
★★★★★ 5
Easy to use
Works great
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 9, 2026
S
Verified Purchase
Steve M.
Bozeman, US
★★★★★ 5
Works well. You need to drill a 3/8” hole
Appears to be well made, alignment bar slides in nicely. As stated, you need to drill a hole in the bar for the gimble bearing driver, the directions are not clear, what I did was before I take out the old gimble bearing, put an O ring on the bar close to the last step on the bar, slide the bar all the way in, then carefully slide the bar out, this marks the distance from the back of the gimble bearing to where the shaft on the outdrive bottoms out, move the O ring a 1/4” towards the stepped part of the alignment tool (this is so you won’t bottom out the alignment tool when driving the gimble bearing in) then slide the driver puck up to the O ring and use a 3/8” diameter transfer punch through the side hole in the puck to mark the bar. You need to drill a 3/8” diameter hole in the alignment bar, two V blocks, some clamps, and a drill press will make drilling much easier, after the bar is securely mounted and centered in the drill press, use a center drill, then 1/4” drill first, using plenty of oil, drill all the way through, then use the 3/8” drill, deburr both sides and you should be good to go. People complain that it doesn’t come pre-drilled, the reason is that not all out drives are the same so you have to fit it to the outdrive that you have. Fortunately, I have a machine shop at my house and have a jig setup with various drill bushings, but the method I described above should work for you. Just make sure you’re perfectly centered and secure before you start drilling.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 16, 2026
N
Verified Purchase
Nancy filippi
Lake Worth, US
★★★★★ 5
A must pull your gimbal bearing
You do need to drill a hole but worked perfect
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 26, 2025
R
Verified Purchase
rich911s
Draper, US
★★★★★ 5
Worked for Volvo Penta SX Gimbal Bearing
Very heavy tool, I was surprised. Pulled my bearing like it was nothing. Putting the new bearing in was a little more difficult as you have to drill a hole in the engine alignment shaft where it will work for your particular outdrive. Not hard, but it does not come pre-drilled as the required depth for each particular gimbal bearing differs by manufacturer and model. Measure your bearing placement before removal and check that it was installed correctly in the first place. The bearing should line up with the grease fitting and the o-rings on the drive shaft should end up riding in the middle of the bearing. once you have your measurement drill the hole, I used a drill press. I suppose you could use it on multiple outdrive models as long as you can drill more holes.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 5, 2023

recommand products

Veredus Fliegenhaube Braun
56.90
Vitalstyle Silicium+
48.99
Veredus Fesselschutz Magnetik Pro Wrap Schwarz
39.90
Veredus Streichkappen Young Jump Vento Hellblau
99.90
Veredus Sehnenschutz Carbon Gel Absolute Front Schwarz
119.95