Pay in installments of $44.38 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 18 - Jul 23
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
ZKLF2575-2Z-XL INATechnische Basisdaten Hersteller: INA Synonym: 0015374400000 BEAM025075 2Z BEAM25 75Z 7 P60 ZKLF2575 2Z ueres Breitenmae: 0 mm oberes Abma Gewicht: 715 Gramm Herstellungsland: Deutschland Kippsteifigkeit: 200 Nm mrad Massentrgheitsmoment: 0,486 kg * cm Planlauf: 2 m Zolltarifnummer: 8482 1090 ueres Breitenmae: b 3 mm der Abziehnut Erweiterte technische Daten 2Z Gap Seals At Both Sides Of The Bearing ueres Breitenmae: Zoll ueres Breitenmae: mm 75,00
Technische Basisdaten
| Hersteller: INA |
| Synonym: 0015374400000 BEAM025075-2Z BEAM25/75Z 7 P60 ZKLF2575-2Z |
| Äußeres Breitenmaße: 0 mm oberes Abmaß |
| Gewicht: 715 Gramm |
| Herstellungsland: Deutschland |
| Kippsteifigkeit: 200 Nm/mrad |
| Massenträgheitsmoment: 0,486 kg * cm² |
| Planlauf: 2 µm |
| Zolltarifnummer: 8482 1090 |
| Äußeres Breitenmaße: b 3 mm der Abziehnut |
Erweiterte technische Daten
| 2Z Gap Seals At Both Sides Of The Bearing |
| Äußeres Breitenmaße: Zoll |
| Äußeres Breitenmaße: mm 75,00 |
| Axial Dynamic Load Rating Ca (N) 30500 |
| Axial Static Load Rating C0a (N) 55000 |
| Begrenzungsdrehzahl für SchmierstoffLubrikation: (n G Fett) "7500.0000" |
| Äußeres Breitenmaße:(B) Zoll |
| Äußeres Breitenmaße:(B) mm 28,00 |
| Äußeres Breitenmaße:(b) mm 28,00 |
| ECLASS number 23-05-10-02 |
| ECLASS2 number 23-05-10-02 |
| Einzelgewicht in (kg): 0.72 |
| Innenmaße: Zoll |
| Innenmaße: mm 25,00 |
| Präzision P4 Präzision (Höher als P5) |
| XL X-Life |
| -0,01 mm Außendurchmesser unteres Abmaß |
| 0 mm Außendurchmesser oberes Abmaß |
| 2 µm Planlauf |
| AM25 Empfohlene INA-Präzisionsnutmutter axial klemmbar |
| Anschlußgewinde für Lubrikation: M6 |
| Anziehdrehmoment für die empfohlene INA-Präzisionsnutmutter: 25 Nm |
| Außendurchmesser oberes Abmaß: 0 mm |
| Außendurchmesser unteres Abmaß: -0,01 mm |
| Betriebstemperatur max.: 120 °C |
| Betriebstemperatur min.: -30 °C |
| Äußeres Breitenmaß der Abziehnut: 3 mm |
| Äußeres Breitenmaß oberes Abmaß: 0 mm |
| C 0a 55.000 N statische Tragzahl, axial |
| C a 30.500 N dynamische Tragzahl, axial |
| C ua 3.350 N Ermüdungsgrenzbelastung, axial |
| Durchmesser Montagesbohrungen: 6,8 mm |
| Empfohlene INA-Präzisionsnutmutter axial klemmbar: AM25 |
| Empfohlene INA-Präzisionsnutmutter radial klemmbar: ZM25 |
| Ermüdungsgrenzbelastung, axial: 3.350 N |
| Größe der Montagesschrauben: M6 |
| J 58 mm Teilkreisdurchmesser Montagesbohrungen |
| M A 25 Nm Anziehdrehmoment für die empfohlene INA-Präzisionsnutmutter |
| M m 0,486 kg*cm2 Massenträgheitsmoment |
| M6 Anschlussgewinde für Lubrikation |
| M6 Größe der Montagesschrauben |
| Minimaler Kantenabstand: 0,3 mm |
| Minimaler Kantenabstand: 0,6 mm |
| Steifigkeit axial: 750 N/µm |
| T max 120 °C Betriebstemperatur max. |
| T min -30 °C Betriebstemperatur min. |
| Teilkreisdurchmesser Montagesbohrungen: 58 mm |
| ZM25 Empfohlene INA-Präzisionsnutmutter radial klemmbar |
| c aL 750 N/µm Steifigkeit axial |
| c kL 200 Nm/mrad Kippsteifigkeit |
| d =2 6,8 mm Durchmesser Montagesbohrungen |
| dynamische Tragzahl, axial: 30.500 N |
| n ϑ 4.700 1/min thermisch zulässige Drehzahl |
| r 1 min 0,6 mm Minimaler Kantenabstand |
| r min 0,3 mm Minimaler Kantenabstand |
| statische Tragzahl, axial: 55.000 N |
| thermisch zulässige Drehzahl: 4.700 1/min |
| ≈m 0,715 kg Einzelgewicht |
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.8 ★★★★★
Based on 30 reviews
Sort
Product Reviews
★★★★★ 5
Good shelves!
Easy enough to assemble and as shown in the pictures you can shape the shelves how you want them. There is one screw hole in the mounting bracket right in the narrow part which makes it difficult to get a screw into. To get around this I just put a screw in at an angle. The quality is decent and I would not overload these by any means. However, if you are looking for cheaper shelves that look decent for light items these will work great.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 10, 2025
★★★★★ 3
Great shelves for the price (~$15), but could be better.
Unlike many others here reviewing the item, I took note of the dimensions & the rough surface of the wood *before* purchasing it & read the instructions that tells you how NOT to assemble it. So my review won't be mentioning how it was smaller than I expected, how unexpectedly rough the wood was, or the fact that it fell off my wall because I didn't read the instructions.
About how NOT to install it- never screw into the board such that the weight is relying on the *screws* to keep it up. Whichever way you place the brackets in relation to the wood, above or below, make sure the weight is ON THE BRACKETS. In other words, *never* screw in from THE TOP OF the shelf.
The instructions specifically point this out, so if you see any reviews about the screws stripping out of the wood and the thing crashing to the floor-- they didn't read the instructions and they assembled it incorrectly.
And no, unlike what some reviews here are telling you, it is not painted plastic. It is wood.
I sanded it, it's wood. They tell you that in the description of the item, too.
Paulownia, but yes, the weight of it reminds you of styrofoam, which isn't a bad thing. Ive read its a sturdy wood, relative to how much it weighs.
I was already expecting rough boards when I bought it, but on top of that fact the surface had the grossest hand-feel I've ever felt (probably from the surface + the paint they used) that I ended up lightly sanding it with 120 grit (which helped a ton with the feel while also doing very little to the painted surface) and painted it with some white paint that we had on hand (it was originally grey). Much better.
The brackets getting in the way of screwing is awful because I don't have a 90° angle screwdriver, but it worked out alright enough. The resulting angle wasn't severe by any means, but still I recommend making sure you have a 90° angle screwdriver before purchasing because I'd much rather it be nice, clean, flush screws.
One point of serious suggestion for the seller would be that the brackets need more than a quick dot of welding. Even though my brackets came relatively even and all with unbroken welding, judging from other reviews and looking at mine, this is an area that could definitely do with some improvement.
Another suggestion for the seller would be to include a few extra drywall anchors. I ended up breaking three of them trying to get them in my drywall and now I have to go find some replacements.
I think our drywall is about as petrified as our studs because in looking up external sources for the best method of installing these types of anchors (to make sure I wouldn't break any. smh) they recommend to NOT predrill, as these are made with no predrilling in mind.
However, when trying to initially gently hammer them in with my rubber mallet as the instructions stated, they just weren't penetrating the drywall very far and I even made sure to pierce the paint layer (which is recommended if your walls have a thick layer of paint from over the years). I actually ended up quite extensively drilling in order to get the first portion of the anchors (before the threads) into the wall without doing too much damage to the anchors.
Ive gotten two of the three shelves up but can't get the last one up until I get more drywall anchors. So far so good. Lightly hand sanded and a couple coats of paint slapped on them and I quite like them.
Definitely takes a lot of time installing them though, so expect that before going into it.
Rated 3 stars for the gross hand-feel, the brackets needing more welding, the brackets that could've been more even with each other, the lack of warning that you'd need a 90° angle screwdriver, and the lack of backup drywall anchors.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 1, 2023
★★★★★ 5
WOULD buy again!!
Color: Dark Brown
VERY STURDY! Id buy them again. Easy to clean & hang on the wall. Look good hanging up. Weight capacity is more then i thought it would be.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 16, 2026
★★★★★ 5
style, durability, and functionality
The Amada HOMEFURNISHING Floating Wall Shelves offer a perfect blend of style, durability, and functionality. Whether you're looking to display decorative items or need extra storage space, these shelves are a valuable addition to any room. Their easy installation and sturdy design make them a worthwhile investment for enhancing your home's decor.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 1, 2025
★★★★★ 5
A Victorian Addition
Color: 4 Panels Black Wood, Size: 4 Panels, Color: 4 Panels Black Wood, Size: 4 Panels
I am so impressed! This room divider is a piece of Victorian architecture for my dressing area. Well made , eye-catching and refined...just beautiful!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 24, 2026
recommand products
KS TOOLS Adapter D, rot ( 150.2065-4 )
43.41
KS TOOLS Reibahle für ABS-Sensoren mit abwinkelbarer Knarre für VAG, Ø 11mm ( 150.1982 )
176.42
KS TOOLS Druckstück zu 150.2143 ( 150.2149 )
71.44
KS TOOLS Kupplungs-Zentrier-Werkzeug-Satz Ø 15,0 - 28,0 mm mit Zentrierhülsen, 11-tlg ( 150.2290 )
36.58
KS TOOLS T-Stück 11,8 x 25 mm (hellblau) ( 150.1858 )
83.87